› › › › Mobil Isopar C


Mobil Isopar C

Цена договорная Запросить стоимость

Paraffinic Solvents

Заказать


Mobil Isopar C

Product Description

ISOPAR is the brand name for eight grades of high-purity isoparaffinic solvents with narrow boiling ranges. The exceptional purity of ISOPAR in the basis for such desirable properties as: low odor, selective solvency, good oxidation stability, low electrical conductivity, low skin irritation, and suitability for many food-related uses. The inherently low surface tension of ISOPAR imparts superior spreadability to proprietary formulations such as furniture polishes, waterless hand cleaners and pesticides.

Typical Properties
 

 

ISOPAR

С

Solvency

 

Kauri-butanol value, ASTMD1133

27

Aniline Point, °C (°F)

78(173)

Volatility

 

Flash Point, ASTM D 56, TCC, °C (°F)

-8(18)

Distillation, ASTM D 86, IBP °C (°F)

98 (208)

Distillation, ASTM D 86, Dry Point °C (°F)

104(219)

Specific Gravity, @ 15.6 °C(60°F), ASTM D 1250

0.70

Composition

 

Saturates

100

Aromatics

‹0.01

Purity, ppm

 

Acids

None

Chlorides

‹3

Nitrogen

-

Peroxides

0

Sulfur

1

Surface Properties

 

Surface tension, dynes/cm @ 25 °C (77°F), ASTM D 971

20.3

Interfacial tension, @ 25 °C (77 °F)

48.9

Demulsibility

Excellent

Health and Safety

Healthy skin condition depends on cleanliness. Oils and greases in contact with skin can result in plugging of sweat glands and hair follicles. This may lead to skin irritation or dermatitis. Accordingly, good personal hygiene should always be practiced. Oils, greases and other foreign materials should be removed from the skin promptly. Soiled clothing should not remain in contact with the skin. ISOPAR is readily removed from the skin by waterless hand cleaners followed by washing with soap, warm water, and a skin brush. It can be removed from clothing by dry-cleaning with solvents or by washing with laundry detergents. If ISOPAR comes in contact with the eyes, wash the eyes with fresh water until the irritation subsides.

WARNING: "Empty" containers retain (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers, to heat, flame, sparks, or other sources of ignition; they may explode and cause injury or death. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explosive hazard. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

Additional important health and safety information on this product can be found in the Material Safety Data Sheet which is available online at www.exxon.com or by contacting Exxon Branded Lubricants, ExxonMobil Lubricants and Petroleum Specialties Company, North America Technical Services - MSDS, 3225 Gallows Road, Fairfax, VA 22037.